Evercade Alpha Bartop Arcade Review

Check out our roundup of the best controllers, too!

The control panel features a bat-top digital arcade joystick and six colored digital arcade buttons. Above the arcade buttons are small Start, Select / Coin Up, and Menu buttons. Above the control panel is an 8-inch 1024 x 768 resolution IPS display with a 4:3 aspect ratio. And to top it all off, a light-up marquee sits above the display.

Besides the Alpha itself, there’s an envelope with two additional marquees, USB-C to USB-A power cable, USB-A power adapter with plugs for three different regions, and a quick start guide in the box. Fortunately, there’s not much to set up, as you can pretty much remove the Alpha from the box, peel off the plastic protectors, apply power, choose your language, set up Wi-Fi, update and restart, and then start playing.

I was able to evaluate the standard Mega Man bartop arcade and the more expensive Deluxe Edition of the Street Fighter bartop arcade. The respective Deluxe Editions include six pieces of marquee art instead of the three that are in the standard edition packages, and are pre-fitted with the upgraded Sanwa stick and button arcade parts. Lastly, the Deluxe Editions come with an exclusive Evercade Alpha-branded USB controller, which is the same type that comes with the Evercade VS consoles.

I first set up the Mega Man bartop and it was easy enough removing the plastic from the marquee protector after sliding it out, but the plastic protection on the screen bezel was more difficult. I had to loosen the bezel screws to get the last bits of plastic, as well as use tweezers, and even then there was a tiny bit left in the corner that I couldn’t quite get. On the plus side, there was only a little dust from the factory behind the bezel, nowhere near as bad as you often get with similar Arcade1Up products. There was also a slight ding on the upper left of the cabinet, which, unfortunately, is not unusual for these types of pre-assembled arcade products.

The Street Fighter Deluxe Edition model was packaged similarly. With lessons learned from the previous unboxing, I loosened the bezel screws, then removed the two plastic cap screw covers to the left and right of the control panel. From there, I removed the screws and panel so I could more easily peel off the rest of the plastic. There were no dings on this one other than a chip above the right control panel screw cover, as well as some misaligned screw covers.

The USB AC adapter included with the Mega Man was defective. Fortunately, any good USB power source can power the Alpha via its USB-C port. The same type of USB AC adapter, which had no issues, was included with the Deluxe Edition Street Fighter.

Evercade Alpha – Built-in Games and Menu System

The main menu has five options on the left-hand side of the screen, and the first at the top lists the built-in games. Below are the rosters built-in for the built-in games on both the Mega Man and Street Fighter editions of the Evercade Alpha.

Evercade Alpha Mega Man Edition games:

• Carrier Air Wing
• Final Fight
• Knights of the Round
• Mega Man: The Power Battle
• Mega Man: The Power Fighters
• Strider

Evercade Alpha Street Fighter Edition games:

• Street Fighter II: Champion Edition
• Super Street Fighter II Turbo
• Super Puzzle Fighter II Turbo
• Street Fighter Alpha: Warriors’ Dreams
• Street Fighter Alpha 2
• Street Fighter Alpha 3

The second menu option showing a cartridge lists the games on any cartridge inserted into the slots. The third menu option shows the game of the month, which is free every month between April and December, and it’s automatically downloaded when you connect to Wi-Fi. For example, the game of the month for November 2024 was Batty Zabella, a point-and-click adventure game for the Game Boy from 2022, and the game of the month for December 2024 was Murtop, a modern retro-style arcade game native to the platform. This area also shows any hidden games you’ve unlocked.

The fourth menu option, showing three cartridge boxes, lists the entire Evercade library. It’s automatically updated with both announced and recently released content, and also tracks the cartridges you’ve inserted into the Alpha. The final menu option, a gear, is for settings. From here, you can adjust the display, theme, sound, network, accessibility options, and more. Besides the standard Evercade themes, both the Mega Man and Street Fighter editions each have their own exclusive themes, which are selected by default.

One of the negatives with the menu system is that it doesn’t always show what button to press to perform a function. For instance, on the main menu, you can use either the joystick or B button to go back to the left-hand side, but there’s no on-screen indication that you can do so. It’s by no means a dealbreaker and something you’ll eventually figure out, but for such a relatively well-thought-out menu system, it would have been nice to have just a bit more consistency with the on-screen control labels.

Games in the menus get showcased with its artwork and a screenshot with it denoting the original release year. You can choose to have it run gameplay by selecting Demo with Y, or go to the game’s main page with Select. When you’re at the game’s main page, you can read details, see how the controls are mapped, select a previous save state, or review play stats, which include the amount of time played, how many times played, save state count, and load count.

Once you start a game, it works like it did on the original platform, which, for the built-in games, were all arcade releases. You can coin-up with the dedicated button, then press Start to begin. Pressing Menu lets you save, load, review and modify the control mapping, change the display settings, reset, or quit. For display settings, you can change the aspect ratio (which is set to the original ratio by default), enable scanlines, or add a decorative bezel. Since the Alpha’s built-in screen is already in 4:3, you can only see a selected bezel if the aspect ratio is set to pixel perfect.

The display is relatively small at just 8.0 inches, but it’s not a bad size since you’re up close. Fortunately, the games the Alpha plays are retro affairs, so they benefit from the more compact display and look great. Viewing angles are also top-notch with very little dimming even at more extreme angles.

The sound is surprisingly good as well, especially for the form factor. It’s not going to fill a room, of course, but it gets quite loud, and there’s minimal distortion even at maximum volume. And while there’s not much bass, what’s there still has enough presence not to sound too hollow. Plugging in good speakers or headphones via the 3.5mm audio jack will sound better, of course. However, it’s unfortunate that, like all Evercade hardware, the Alpha lacks any type of Bluetooth support.

In terms of the built-in games themselves, they look, sound, and control great with no noticeable emulation issues. The arcade-quality Sanwa joystick and buttons on the Deluxe are worth the upgrade if you can find that pricier model, but the choice of joystick on the standard model is surprisingly nearly as good, just with a slightly looser feel. I did like the Sanwa buttons on the Deluxe better than the generic buttons of the standard, however, as they were less noisy overall and just felt a bit more responsive. Of course, even if you don’t get a Deluxe, Blaze Entertainment made it easy to upgrade the controls yourself with a choice of standard arcade parts.

Evercade Alpha – Game Library and Control Options

The ace-in-the-hole for any Evercade hardware is not necessarily what’s built-in, but rather its growing cartridge library. Through the end of 2024, there have been 63 cartridge releases totaling more than 520 games from the arcade, Atari 2600, Atari 7800, NES, Sega Genesis, Super NES, Atari Lynx, PlayStation 1, Game Boy, Game Boy Color, GBA, Intellivision, N64, Commodore 64, Commodore Amiga, and MSX, as well as newer titles native to the platform.

Every cartridge comes in a small plastic case, along with a color manual, though, as with the Alpha’s built-in games, basic instructions are also always provided on a particular game’s main page. While it can be jarring to have the Alpha switch controls to what’s native for a particular platform, where, for instance, B is sometimes an action button rather than back, that’s unavoidable given the diversity of platforms emulated.

Cartridge cases are loosely categorized by color, with console (red), arcade (purple), and home computer (blue), as well as number. Some cartridges enter what’s called Legacy status, where no more are produced, but if a cartridge is generally available it typically retails for between $20 and $30.

Like the Evercade VS consoles, and unlike the Evercade handhelds, the Alpha has two hot swappable cartridge slots. Besides the convenience of having two sets of additional games immediately available, inserting certain cartridge combinations unlocks additional games. For instance, inserting both the legacy Atari Collection 1 (01) and Atari Collection 2 (05) cartridges unlocks the Atari 7800 version of Dark Chambers.

One area where the Alpha lags behind the Evercade VS consoles is with multiplayer support. Unlike the consoles, which support up to four controllers, the Alpha only supports two at this time, with just a few exceptions. Typically, iIf you plug in an Evercade-compatible gamepad into the first USB port, it will mirror the main control panel as player 1. However, in the built-in Knights of the Round game on the Mega Man Alpha, there’s a “Play in 3 player mode” option after you plug in two USB controllers. Same thing with The Combatribes on the Technos Arcade 1 (A01) cartridge. It’s unclear if or when Evercade will enable this extended multiplayer feature for other games.

One quirk of the library is that the legacy Namco Museum Collection 1 (02) and Namco Museum Collection 2 (06) cartridges are not licensed for Evercade VS series console output to a TV, although those games do work when output to a TV from the original handhelds. Fortunately, since the Alpha is self-contained and has no HDMI output, those games work just fine, although it’s a shame they’re not the arcade versions, but rather home ports.

Since the Evercade platform only supports digital controls, the small number of games that could benefit from analog control, like the Nintendo 64’s Glover, found on Piko Interactive Collection 4 (39), are optimized to make the best use of what’s available. As such, every game, from Pong to Tomb Raider, works just fine with the Alpha’s digital arcade control panel. For instance, in Tomb Raider (from Tomb Raider Collection 1 (40)), as with the original Evercade handheld and the Super Pockets, there are no L2 or R2 buttons on the Alpha. You’ll need to hold down L1 and R1 at the same time and move the joystick left or right to side step left or right, respectively, rather than just pressing L2 to side step left, or R2 to side step right. Again, most games don’t make use of eight buttons, let alone the six found on the Alpha, but it’s something to take note of if you don’t have an alternative controller handy.

Besides Blaze Entertainment’s own Evercade gamepads, the platform is generally compatible with the same controllers and adapters that the Polymega works with. This includes Polymega’s own controller, the 8BitDo Arcade Stick, and modern Xbox, PlayStation, Switch or Wii controllers via the 8BitDo USB Wireless Adapter 2.

While I’m an Evercade platform fan and have every one of their handhelds and consoles, overall, I found the Alpha an ideal way to play many of the games in the library. While it’s nice to enjoy classic games on a handheld or big-screen TV, there’s something extra special about sitting in front of a mini arcade-style setup with a proper 4:3 aspect ratio display. It’s a great middle-ground and is a form factor that’s absolutely justified being added to the growing Evercade ecosystem.